Conveniently integrated with a DAPLink programming and debug interface, and complete with Arduino compatible headers, this platform can be used to prototype applications using a wide range of IO boards and peripherals supported by mbed in the mbed Component library.
You may read more about it here..
Or purchase L-Tek FF1705 here.
L-Tek FF1502 high-tech platform architecture enables rapid modification and re-design possibilities which can be implemented by adding custom modules, sensors, actuators and power supply interfaces! L-Tek FF1502 has already integrated scalability and seamless bridging characteristics, as well as many integrated sensors to measure temperature, humidity, ambient light, 3-axis magnet fields, acceleration and rotation.
Should you be interested in more information on the power consumption of a L-Tek FF1502, read the white paper.
You may read more information here.
Or purchase L-Tek FF1502 here.
New arm KEIL ULINKplus product developed in cooperation with L-Tek.
For some years, L-Tek has been cooperating successfully with arm KEIL in the development of ULINK family products. We would like to announce the launch of a new ULINKplus product which enables software optimization for ultra-low power applications, test automation and isolation for high-speed debug and trace of sensitive hardware systems. Please, review the development results of the latest ULINKplus at: http://www2.keil.com/mdk5/ulink/ulinkplus/.
The research and development group for a major achievement in the field of mobile-health is composed of experts from the Jozef Stefan Institute, SAVING and L-TEK.
Puh award recognises major achievements in medical equipment.
Dr Roman Trobec, Associate Professor, Dr Viktor Avbelj, Dr Matjaž Depolli, Dr Aleksandra Rashkovska Koceva, Tomaž Krištofelc, technician, Klemen Bregar, Dipl Ing, Dr Gregor Kosec, Associate Professor, Dr Uroš Stanič, Dr Ivan Tomašič, Boštjan Barbiš, Dipl Ing, and Marino Marinko Samardžija, Dipl Ing
The group produced a miniature device for recording the electrocardiogram SAVVY ECG, which enables for heart rate to be recorded unobtrusively during daily activities over several days, thus enabling the detection and investigation of heart rhythm disturbances over long periods, which had previously not been possible. An innovative ECG meter has been launched in the global market in the form of a medically proven product. Simple and safe handling, as well as affordable price also allow for personal use at home, which is a novelty on the global scale. Having been introduced into the range of widespread medical applications, the system will significantly contribute to more efficient and accessible healthcare for users.
Overall, the achievement is an exceptional example of a successful knowledge chain that has been realized in production and has proven that the field of biomedicine offers many opportunities for the implementation of advanced medical devices and services.
The L-Tek team has attended the very well-known Arm TechCon on 24-26 October 2017 at Santa Clara, USA. L-Tek and Arm have been business and development partners for a number of years. Our synergies are related to new technical developments and solutions in the area of IoT – electronics and software solutions.
Arm TechCon 2017 brought a wide range of innovations in the areas of Embedded Software Development, Silicon Design, Automotive, Industrial & Functional Safety, Computer Vision, Machine Learning & Graphics, Networking & Servers, High-Efficiency Systems, Internet of Things and Trust & Security.
The main themes of the conference were IoT and Trust & Security, which included presentations of challenges in these areas and how to address them. MBED arm successfully presented their solutions, some of which have been developed with our support.
This year we have been presented a lot of practical and business examples from different industries which made the conference even more attractive and successful!
You may read about the presented arm MBED solution in different segments of the linked website: https://www.mbed.com/en.
This year L-Tek® once again participated in the selection of the best innovations at the Chamber of Commerce and Industry of Lower Carniola and White Carniola. We registered the newly developed “IoT Building Blocks Control and Management Platform” and received a golden recognition award in June.
After successful endeavours on the regional level in the past we participated in the selection at Innovation Day 2017 on the national level within the Chamber of Commerce and Industry of Slovenia a few days ago. We are proud to announce that we received a SILVER RECOGNITION AWARD on September 27th at the Congress Center Brdo pri Kranju! You can see the entire innovations catalogue at: https://daninovativnosti.gzs.si/Portals/210/katalog_2017.pdf
On this special occasion we would like to expres special thanks to the whole L-Tek team, especially to our innovators: Matej Slapšak, Dr. Viktor Zaletelj, Simon Krulec, Marko Stušek, Primož Zajec, Gašper Sladič, Klemen Škoda, Gorazd Kovačič and Jernej Vrščaj.
L-Tek is proud to present our new L-Tek IoT brand. The L-Tek IoT brand represents a family of state-of-the-art SMART IoT products that offer today’s leading measuring, monitoring and control solutions. All products can be modified and optimised for different situations, so they are FUN to use! L-Tek IoT solutions are developed and designed base on the L-Tek SMART IoT platform which enables you to reach the measurable, controllable and optimized results.
More info: L-Tek IoT
Accompanied by its innovative development solutions, L-Tek has been recognised as a competent development partner by as many as two out of a total of nine selected consortia for the implementation of programs in priority areas where Slovenia has long-term potential for successfully penetrating the global markets and a more successful and complete integration into global value chains.
It involves the implementation of research and development programmes that link the academic sphere and the economy, combining knowledge and competencies for the development of new products, services and processes, and the use of new technologies in priority areas: Smart cities and communities, Smart buildings and homes, including wood chain homes, Networks for the transition to circular economy, Sustainable food production, Factories of the Future, Health-medicine, Mobility and Development of materials as final products.
L-Tek participates in the programmes TIGR4smart – Sustainable and Innovative construction of smart buildings (priority area: Smart buildings and homes, including wood chain) and GOSTOP – Building Blocks, Tools and Systems for Factories of the Future (priority area: Factories of the Future). Find out more about individual programmes in the documents attached and open the following link to read about the method of selecting programmes that show the concentration of knowledge and competencies, and scientific and technological excellence:
Gradniki, orodja in sistemi za tovarne prihodnosti – GOSTOP
Building Blocks, Tools and Systems for Factories of the Future – GOSTOP
Trajnostno in inovativno gradbeništvo za pametne stavbe – TIGR4smart
Sustainable and Innovative construction of smart buildings – TIGR4smart